Lexmark MX321 - Adjusting Scanner Registration

Action Yes No
Step 3
a Turn o the printer, wait for about 10 seconds, and then turn the
printer on.
b Copy or scan the document.
Is the scanner responding?
The problem is
solved.
Contact
customer
support.
Adjusting scanner registration
1 From the control panel, navigate to:
Settings > Maintenance > Configuration Menu > Scanner Configuration > Scanner Manual Registration
For non-touch-screen printer models, press
to navigate through the settings.
2 From the Print Quick Test menu, select Start.
3 Place the Print Quick Test page on the scanner glass, and then select Flatbed Registration.
4 From the Copy Quick Test menu, select Start.
5 Compare the Copy Quick Test page with the original document.
Note: If the margins of the test page are dierent from the original document, then adjust Left Margin and
Top Margin.
6 Repeat step 4 and step 5 until the margins of the Copy Quick Test page closely match the original document.
Adjusting ADF registration
1 From the control panel, navigate to:
Settings > Maintenance > Configuration Menu > Scanner Configuration > Scanner Manual Registration
For non-touch-screen printer models, press
to navigate through the settings.
2 From the Print Quick Test menu, select Start.
3 Place the Print Quick Test page on the ADF tray.
4 Select Front ADF Registration or Rear ADF Registration.
Notes:
• To align Front ADF Registration, place the test page faceup, short edge first into the ADF.
• To align Rear ADF Registration, place the test page facedown, short edge first into the ADF.
5 From the Copy Quick Test menu, select Start.
6 Compare the Copy Quick Test page with the original document.
Note: If the margins of the test page are dierent from the original document, then adjust Horizontal
Adjust and Top Margin.
7 Repeat step 5 and step 6 until the margins of the Copy Quick Test page closely match the original document.
Troubleshooting 182