Lexmark MX321 - Scanning; Scanning to an FTP Server; Creating an FTP Shortcut

Scanning
Scanning to an FTP server
1 Load the original document into the ADF tray or on the scanner glass.
2 From the control panel, navigate to:
> FTP > > enter the needed information
If necessary,
configure
other FTP settings.
3 Scan the document.
Creating an FTP shortcut
1 Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Shortcuts > Add Shortcut > select FTP from the Shortcut Type menu.
3 Configure the settings.
4 Apply the changes.
Scanning 40