Lexmark MX321 - Sending a fax

Setting the fax date and time
1 Open a web browser, and then type the printer IP address in the address
field.
Notes:
• View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Settings > Device > Preferences > Date and Time > Configure.
3 Configure the settings.
4 Apply the changes.
Configuring
daylight saving time
1 Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Settings > Device > Preferences > Date and Time > Configure.
3 In the Time Zone menu, select Custom.
4 Configure the settings.
5 Apply the changes.
Sending a fax
Using the control panel
1 Load the original document into the ADF tray or on the scanner glass.
2 From the control panel, navigate to:
> Fax > > enter the needed information >
If necessary,
configure
other fax settings.
3 Fax the document.
Using the computer
Note: Make sure that the Universal Fax driver is installed with the printer software. For more information, see
“Installing the printer software” on page 191.
Faxing 36