Menu item Description
Mac Binary PS
Auto*
On
O
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
• On processes raw binary PostScript print jobs.
• O filters print jobs using the standard protocol.
Ethernet
Menu item Description
Network Speed Show the speed of an active network adapter.
IPv4
Enable DHCP
On*
O
Enable Dynamic Host Configuration Protocol (DHCP).
Note: DHCP is a standard protocol that allows a server to dynamically
distribute IP addressing and
configuration
information to clients.
IPv4
Set Static IP Address
IP Address
Netmask
Gateway
Set the static IP address of your printer.
Enable IPv6
On*
O
Configure IPv6 in the printer.
Enable DHCPv6
On
O*
Run DHCPv6 in an IPv6 network.
Stateless Address
Autoconfiguration
On*
O
Set the network adapter to accept the automatic IPv6 address configuration
entries provided by a router.
DNS Address Specify the DNS server address, IP address, and the router for IPv6 network.
Manually Assigned IPv6 Address
Manually Assigned IPv6 Router
Address Prefix
0–128 (64*)
All IPv6 Addresses Show all IP and router addresses used in an IPv6 network.
All IPv6 Router Addresses
Network Address
UAA
LAA
Show the printer Media Access Control (MAC) addresses: Locally Administered
Address (LAA) and Universally Administered Address (UAA).
Note: You can change the printer LAA manually.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 89
To Next Page
Loading...
