What to do when Lexmark All in One Printer says 'Imaging unit very low'?
Your Lexmark All in One Printer indicates that the imaging unit is very low and may need replacement soon. Select Continue on the printer control panel to clear the message and continue printing.
What does 'Supply needed to complete job' mean on Lexmark All in One Printer?
To resolve this issue on your Lexmark All in One Printer, install the missing supply to complete the job, or cancel the current job.
How to replace defective imaging unit on Lexmark All in One Printer?
To resolve this issue with your Lexmark All in One Printer, replace the defective imaging unit. If you do not have a replacement imaging unit, visit www.lexmark.com for ordering information.
What to do when Lexmark All in One Printer displays 'Maintenance kit nearly low'?
Your Lexmark All in One Printer indicates that the maintenance kit is nearly low. If necessary, select Continue to clear the message and continue printing.
What to do when Lexmark All in One Printer displays 'Maintenance kit very low'?
Your Lexmark All in One Printer indicates that the maintenance kit is very low and may need to be replaced soon. If necessary, select Continue on the printer control panel to clear the message and continue printing.
What does 'Fax server not set up' mean on Lexmark All in One Printer?
To resolve this issue with your Lexmark All in One Printer, select Continue on the printer control panel to clear the message. Complete the Fax Server setup.
How to load specific paper type and size in manual feeder of Lexmark All in One Printer?
To fix this issue with your Lexmark All in One Printer, load the multipurpose feeder with the correct size and type of paper. Depending on your printer model, touch Continue or press to clear the message and continue printing. You can also cancel the current job.
What to do if Lexmark MX417 displays 'Some held jobs were not restored'?
If your Lexmark Printer indicates that 'Some held jobs were not restored', select 'Continue' on the printer control panel to delete the specified job.
What to do if Lexmark MX417 Printer says 'Cartridge low'?
If your Lexmark Printer displays a 'Cartridge low' message, you may need to order a new toner cartridge. To clear the message and continue printing, select 'Continue' on the printer control panel, if necessary.
What to do if Lexmark MX417 Printer displays 'Replace cartridge'?
When your Lexmark Printer shows 'Replace cartridge', you should replace the toner cartridge to clear the message and continue printing.
General| Print Technology | Laser |
|---|---|
| Functionality | Print, Copy, Scan, Fax |
| Print Speed (Black) | 40 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 80, 000 pages |
| Wi-Fi | Optional |
| Operating Systems Supported | Windows, macOS, Linux |
| Duplex Printing | Yes |
| Scan Resolution | 600 x 600 dpi |
| Copy Speed (Letter, Black) | 40 cpm |
| Fax Speed | 33.6 Kbps |
| Fax Transmission Speed | 3 seconds per page |
| Standard Paper Capacity | 250 pages |
| Maximum Paper Size | 8.5 x 14 inches |
| Connectivity | Ethernet, USB |
| Scanner Type | Flatbed |
| Mobile Printing | Google Cloud Print |
To Next Page
