Notes:
• View the IP address on the home screen. The IP address appears as four sets of numbers separated by
periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2 Click Settings > Security > Set Date and Time.
3 In the Manually Set Date & Time field, enter the current date and time.
Note: The use of network time is recommended.
4 Click Submit.
Configuring the printer to observe daylight saving time
The printer can be set to automatically adjust for daylight saving time.
1 Open a Web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2 Click Settings > Security > Set Date and Time.
3 Click the Automatically Observe DST check box.
4 In the Custom Time Zone Setup section, set the DST start and end dates.
5 Click Submit.
Sending a fax
Sending a fax using the control panel
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Fax, and then enter the fax number.
Notes:
• You can also enter the recipient using the shortcut number or address book.
• To add recipients, touch Next number.
3 Touch Fax It.
Sending a fax using the computer
1 With a document open, click File > Print.
2 Select the printer, and then click Properties, Preferences, Options, or Setup.
Faxing 105
To Next Page
Loading...
