Lexmark MX910 Series - Sending a Fax at a Scheduled Time

3 Navigate to:
Fax > Enable fax
4 Enter the recipient fax number or numbers.
5 If necessary, enter a prefix in the “Dialing prefix” field.
6 Select the appropriate paper size and page orientation, and then apply the changes.
Notes:
• The fax option is available for use only with the PostScript driver or the Universal Fax Driver. For information on
installing these drivers, go to
http://support.lexmark.com.
• The fax option must be configured and enabled in the PostScript driver under the Configuration tab before it can
be used.
Sending a fax at a scheduled time
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
3 From the home screen, navigate to:
Fax > enter the fax number > Options > Delayed Send
Note: If Fax Mode is set to Fax Server, then the Delayed Send button does not appear. Faxes waiting for
transmission are listed in the fax queue.
4 Specify the time the fax will be transmitted, and then touch .
5 Touch Fax It.
Note: The document is scanned, and then faxed at the scheduled time.
Faxing 106