4 Load the paper stack with the printable side faceup.
Notes:
• Load printable side facedown for duplex printing.
• Load pre-punched paper with the holes toward the front or the left side of the tray.
• Load letterhead with the header on the left side of the tray.
• Make sure that the paper is below the maximum fill line on the edge of the paper tray. Overfilling may cause
paper jams.
5 Insert the tray.
6 From the control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.
Loading the multipurpose feeder
1 Open the multipurpose feeder.
Loading paper and specialty media 53
To Next Page
Loading...
