Action Yes No
Step 3
a Depending on your operating system, specify the paper type and
weight from Printing Preferences or from the Print dialog.
b Resend the print job.
Do shadow images still appear on prints?
Go to step 4. The problem is solved.
Step 4
a Clean the charger and the printhead lens.
b Resend the print job.
Do shadow images still appear on prints?
Go to step 5. The problem is solved.
Step 5
Replace the photoconductor unit, and then resend the print job.
Warning—Potential Damage: Do not expose the photoconductor unit
to direct light for more than 10 minutes. Extended exposure to light can
cause print quality problems.
Do shadow images still appear on prints?
Contact
customer
support.
The problem is solved.
Skewed print
ABCDE
ABCDE
ABCDE
Action Yes No
Step 1
a Move the width and length guides in the tray to the correct positions
for the size of the paper loaded.
b Resend the print job.
Is the print still skewed?
Go to step 2. The problem is solved.
Step 2
a Check if you are printing on a paper that is supported by the tray.
b Resend the print job.
Is the print still skewed?
Contact
customer
support.
The problem is solved.
Troubleshooting 313
To Next Page
Loading...
