Notification Description
Non Continuable Stop
1,2
The printer stops processing jobs when the supply condition is reached. The supply must be
replaced to continue printing.
1
The printer generates an e-mail about the status of the supply when supply notification is enabled.
2
The printer stops when some supplies become empty to prevent damage.
4 Click Submit.
Restoring factory default settings
If you want to keep a list of the current menu settings for reference, then print a menu settings page before restoring
the factory default settings. For more information, see
“Printing a menu settings page” on page 50.
For a more comprehensive method of restoring the printer factory default settings, see
“Erasing non‑volatile memory”
on page 203.
Warning—Potential Damage: Restoring factory defaults returns most printer settings to the original factory default
settings. Exceptions include the display language, custom sizes and messages, and network/port menu settings. All
downloads stored in the RAM are deleted. Downloads stored in the flash memory or in a printer hard disk are not
affected.
1 From the home screen, navigate to:
> Settings > General Settings > Factory Defaults > Restore Now
2 Apply the changes.
Managing the printer 241
To Next Page
Loading...
Need help?
General
