[x]‑page jam, clear jammed paper from multipurpose
feeder. [200.xx]
1 Remove all paper from the multipurpose feeder.
2 Remove the jammed paper.
3 Open door C to remove any paper fragments.
Note: Make sure that door C does not hit any cable attached to the printer.
4 Close door C.
5 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
6 Reload the paper.
[x]‑page jam, open door C and clear all jammed paper. [2yy.xx]
1 Open door C. Make sure that it does not hit any cable attached to the printer.
2 Remove the jammed paper from any of the following locations:
Note: Make sure that all paper fragments are removed.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
Clearing jams 245
To Next Page
Loading...
