Lexmark MX910 Series - Supported Paper Types

Paper size Staple finisher Staple, hole punch finisher Booklet finisher
Letter
4
A4
4
Legal
3
12 x 18
1 1 3
11 x 17
4
SRA3
4
1 1 4
A3
4
Oficio
1 1
X
Folio
1 1
X
Statement
1 1
X
Universal
1
X
1
Paper is supported only if the finisher stacks the paper but does not staple or punch holes in it.
2
Paper is supported only if the finisher stacks or staples the paper but does not punch holes in it.
3
Paper is supported only if the finisher staples the paper but does not stack or fold it.
4
Paper is supported only if the finisher staples or folds it.
Supported paper types
Paper type Staple finisher Staple, hole punch finisher Booklet finisher
Plain Paper
5
Card Stock
2
X
Transparency
1
2 3
X
Recycled
2
X
Glossy
2
X
Heavy Glossy
2 4
X
Labels
2 3
X
Bond
X
1
Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information, see
“Tips on using transparencies” on page 60.
2
The paper type is supported only if the finisher stacks the paper but does not staple it.
3
The paper type is supported only if the finisher stacks the paper but does not staple or punch holes in it.
4
The paper type is supported only if the finisher punches holes or stacks the paper but does not staple it.
5
The paper type is supported only if the finisher staples or folds the paper.
Paper and specialty media guide 68