Paper type Standard
500‑sheet
tray (Tray 1)
Standard
500‑sheet
tray (Tray 2)
2 x 500-
sheet tray
2500‑sheet
tray
3000‑sheet
tray
Multipurpose
feeder
ADF Scanner
Labels X
XX
Bond
1
X
Envelope X XX
Rough Envelope X X X X X
Letterhead
1
XX XXX
Preprinted
1
XX XXX
Colored Paper
1
XX XXX
Light Paper
1
XX XXX
Heavy Paper
1
XX XXX
Rough Cotton X X X X X
Custom Type
1
1
Paper is supported for two‑sided printing.
2
Print transparencies in batches of only up to 20 to prevent them from sticking together. For more information, see “Tips
on using transparencies” on page 60.
Paper sizes, types, and weights supported by the finishers
The printer engine supports 60–256 g/m
2
(16–68‑lb) paper weights.
Note: When a finisher is installed, the standard finisher bin becomes the default bin even for print jobs that do not
require finishing.
Supported paper sizes
Paper size Staple finisher Staple, hole punch finisher Booklet finisher
A6
1 1
X
A5
1 2
X
JIS B5
X
JIS B4
3
Executive
X
1
Paper is supported only if the finisher stacks the paper but does not staple or punch holes in it.
2
Paper is supported only if the finisher stacks or staples the paper but does not punch holes in it.
3
Paper is supported only if the finisher staples the paper but does not stack or fold it.
4
Paper is supported only if the finisher staples or folds it.
Paper and specialty media guide 67
To Next Page
Loading...
