•
For two-sided printing, load letterhead faceup with the
header toward the rear of the printer. Load hole-punched
paper faceup with the holes to the left side of the paper.
For short-edge feed:
•
For one-sided printing, load letterhead facedown with the
header to the left side of the paper. Load hole-punched
paper facedown with the holes toward the front of the
printer.
•
For two-sided printing, load letterhead faceup with the
header to the left side of the paper. Load hole-punched
paper faceup with the holes toward the front of the printer.
Note: When a finisher is installed, the printer rotates the images
to 180°.
Setting the size and type of the
specialty media
The trays automatically detect the size of plain paper. For specialty
media like labels, card stock, or envelopes, do the following:
1
From the home screen, touch Settings > Paper > Tray
Configuration
> Paper Size/Type > select a paper source.
2
Set the size and type of the specialty media.
16
To Next Page
Loading...
