Lexmark MX931 - Paper Jam in the Automatic Document Feeder; Paper Jam in the Staple Finisher

2 Open door C, and then remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3 Close door C, and then close door A.
4 Removed jammed paper from the standard bin.
Note: Make sure that all paper fragments are removed.
Paper jam in the automatic document
feeder
1 Remove all original documents from the ADF tray.
2 Open the ADF cover.
3 Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
4 Close the ADF cover.
Paper jam in the staple finisher
1 Open door A.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
23