Lexmark MX931 - Paper Jam in Door a; Paper Jam in the Standard bin

Note: Make sure that all paper fragments are removed.
5 Push the tray insert back into place.
Paper jam in door A
1 Open door A.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
2 Remove the jammed paper from any of the following areas:
Note: Make sure that all paper fragments are removed.
• Fuser area
• Duplex unit
• Door C
3 Close the door.
Paper jam in the standard bin
1 Open door A.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
22