Jam locations
1 Multipurpose feeder
2 Door A
3 Automatic document feeder
4 Standard bin
5 Horizontal transport unit
Jam locations
6 Staple, hole punch
finisher
7 Standard tray
8 2000‑sheet tray
9 Staple
finisher
10 Optional trays
Paper jam in the standard tray
1
Open door A.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
2
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3
Pull out the standard tray.
4
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
5
Insert the tray, and then close door A.
19
To Next Page
Loading...
