Why is printing too dark from my Lexmark Printer?
If the printing is too dark on your Lexmark printer, change the Toner Darkness setting in the Quality Menu. For Macintosh computer users, ensure that the lines per inch (lpi) setting is not set too high in the software application.
Why do streaks appear on the page from Lexmark Printer?
If streaks appear on the page when using your Lexmark printer, the toner may be low. To utilize the remaining toner, remove the cartridge by gripping the handles with both hands. With the cartridge arrows pointing downward, shake the print cartridge back and forth. Reinstall the cartridge and then press Go. Also, if you are using preprinted forms, make sure the ink can withstand temperatures of 212°C (414°F).
Why is the entire page white from my Lexmark T630?
If the entire page is white when printing with your Lexmark printer, ensure that the packaging material is removed from the print cartridge and check that the print cartridge is installed correctly. The toner may also be low. To utilize the remaining toner, remove the cartridge, grip the handles with both hands, point the cartridge arrows downward, shake the print cartridge back and forth, reinstall the cartridge, and then press Go.
Why toner fog appears on the page from Lexmark T630?
If toner fog or background shading appears on the page when using your Lexmark printer, check the print cartridge to make sure it is installed correctly. If the problem continues, change the print cartridge. If the problem still continues, change the charge roll.
Why is my Lexmark Printer not duplexing pages?
If your Lexmark printer is not duplexing pages, ensure that 'Duplex' is selected in both the Finishing Menu and in the printer driver. Also, make sure you have enough printer memory installed.
What to do if Lexmark Printer toner smears?
If the toner smears or the print comes off the page when using your Lexmark printer, and you are printing on an uneven print surface, change the Paper Weight and Paper Texture settings in the Paper Menu. Also, verify that the print media is within the printer specifications.
Why is the print too light on my Lexmark T630?
If the print from your Lexmark printer is too light, the toner may be low. Remove the cartridge, grip the handles with both hands, point the cartridge arrows downward, and shake it back and forth to utilize the remaining toner. Reinstall the cartridge and press Go. You can also change the Toner Darkness setting in the Quality Menu. If printing on an uneven surface, adjust the Paper Weight and Paper Texture settings in the Paper Menu, and verify that you are using the correct print media.
How to fix Lexmark T630 Printer when print media misfeeds?
If your Lexmark printer is misfeeding or feeding multiple sheets, ensure the print media meets the printer's specifications. Flex the print media before loading. Make sure the print media is loaded correctly, and the width and length guides are adjusted properly. Do not overfill the print media sources or force print media into the multipurpose feeder. Remove any curled print media and load the recommended print side correctly. Try loading less print media, turning it over, and avoiding mixing different types or reams of print media. Remove the top and bottom sheets of a ream before loading, and only load a print media source when it is empty.
General| Print Technology | Laser |
|---|---|
| Print Speed | Up to 35 ppm |
| Resolution | 1200 x 1200 dpi |
| Operating System Compatibility | Windows, Mac, Linux, UNIX |
| Connectivity | Parallel, USB |
| First Print Out Time | Less than 8.5 seconds |
| Duplex Printing | Optional |
| Media Sizes | A4, A5, Letter, Legal, Executive, Folio |
| Paper Capacity | 100-sheet multipurpose feeder |
| Weight | 43 lbs (19.5 kg) |
To Next Page
