Menu item Description
Feed Direction
Short Edge
Long Edge
Specifies the feed direction if the paper can be loaded in either
direction
Notes:
• Short Edge is the factory default setting.
• Long Edge appears only if the longest edge is shorter than the
maximum width supported in the tray.
Bin Setup menu
Menu Item Description
Output Bin
Standard Bin
Bin <x>
Specifies the default output bin
Note: Standard Bin is the factory default setting.
Configure Bins
Mailbox
Link
Mail Overflow
Link Optional
Type Assignment
Specifies configuration options for output bins
Notes:
• Mailbox is the factory default setting.
• Bins assigned the same name are automatically
linked unless Link Optional is selected.
• The Mailbox setting treats each bin as a separate
mailbox.
• The Link setting links together all available output
bins.
• The Link Optional setting links together all
available output bins except the standard bin and
only appears when at least two optional bins are
installed.
• The Type Assignment setting assigns each paper
type to an output bin or linked bin set.
Overflow Bin
Standard Bin
Bin <x>
Specifies an alternate output bin when a designated
bin is full
Note: Standard Bin is the factory default setting.
Understanding printer menus
107
To Next Page
Loading...
Need help?
General
