Lexmark T650dn User Manual

Menu item Description
N-up Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Specifies the positioning of multiple-page images when using N-up
(pages-sides)
Notes:
• Horizontal is the factory default setting.
• Positioning depends on the number of images and whether the images
are in portrait or landscape orientation.
Orientation
Auto
Landscape
Portrait
Specifies the orientation of a multiple-page sheet
Note: Auto is the factory default setting. The printer chooses between portrait
and landscape.
N-up Border
None
Solid
Prints a border around each page image when using N-up (pages-sides)
Note: None is the factory default setting.
Staple Job
Off
On
Specifies whether print jobs are stapled
Notes:
• This menu item is available only when the StapleSmart Finisher is installed.
• Off is the factory default setting. Print jobs are not stapled.
• Envelopes are not stapled.
Offset Pages
Off
Between Jobs
Between Copies
Stacks copies or print jobs into staggered sets in an output bin
Notes:
• This menu item appears only when the StapleSmart Finisher is installed.
• Off is the factory default setting. No pages are offset during the print job.
• Between Jobs offsets each print job.
• Between Copies offsets each copy of a print job.
Quality menu
Menu item Description
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image Q
Specifies the printed output resolution
Note: 600 dpi is the factory default setting. The printer driver default is 1200 IQ.
Understanding printer menus
136

Lexmark T650dn Specifications

General

Brand	Lexmark
Model	T650dn
Category	Printer
Language	English