Menu item Description
Resource Save
On
Off
Specifies how the printer handles temporary downloads, such
as fonts and macros stored in RAM, when the printer receives
a job that requires more memory than is available
Notes:
• Off is the factory default setting. Off sets the printer to
retain the downloads only until memory is needed.
Downloads are deleted in order to process print jobs.
• The On setting retains the downloads during language
changes and printer resets. If the printer runs out of
memory, 38 Memory Full appears, and downloads are
not deleted.
Print All Order
Alphabetically
Newest First
Oldest First
Specifies the order in which held and confidential jobs are
printed when Print All is selected
Notes:
• Alphabetically is the factory default setting.
• Print jobs always appear in alphabetical order on the
printer control panel.
Finishing menu
Menu item Description
Sides (Duplex)
2 sided
1 sided
Specifies whether duplex (2-sided) printing is set as the default for all print jobs
Notes:
• 1 sided is the factory default setting.
• To set 2-sided printing from the software program: for Windows users, click
File Print, and then click Properties, Preferences, Options, or Setup;
for Macintosh users, choose File > Print, and then adjust the settings from
the Print dialog and pop-up menus.
Duplex Binding
Long Edge
Short Edge
Defines the way duplexed pages are bound and how the printing on the back
of the page is oriented in relation to the printing on the front of the page
Notes:
• Long Edge is the factory default setting.
• Long Edge specifies that binding be placed on the left edge of portrait
pages and the top edge of landscape pages.
• Short Edge specifies that binding be placed on the top edge of portrait
pages and the left edge of landscape pages.
Copies
1–999
Specifies a default number of copies for each print job
Note: 1 is the factory default setting.
Understanding printer menus
134
To Next Page
Loading...
Need help?
General
