Enter PIN
Enter the PIN you created in Print Properties when the confidential job was sent for printing.
Error reading USB drive
Remove the device and wait for the message to clear. The USB drive may be corrupted.
Flushing buffer
Wait for the message to clear.
Formatting Disk x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is formatting the printer hard disk.
The percentage completed appears on the display.
Formatting Flash DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is formatting the flash memory.
Hex Trace Ready
The printer is in the Ready state, and Hex Trace is active. You can use Hex Trace to troubleshoot printer problems.
Insert staple cartridge
Try one or more of the following:
• Insert a staple cartridge to clear the message.
• Press to clear the message and print without using the staple feature.
Insert Tray <x>
Insert the specified tray into the printer.
Install bin <x>
Try one or more of the following:
• Install the specified bin:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Install the specified bin.
4 Connect the power cord to a properly grounded outlet.
5 Restart the printer.
• Cancel the current job.
Understanding printer messages
151
To Next Page
Loading...
Need help?
General
