10
Set up the optional high capacity feeder
To set up the high capacity feeder or
base cabinet:
Warning! Lift the high capacity feeder
from the bottom.
1 Remove the high capacity feeder
or cabinet from its packing
materials.
Warning! Be sure you remove the
sheets of foam packing from the bottom
of both trays before you print from the
high capacity feeder.
Be sure to remove the foam
packing and tape from the trays.
Save the carton and packing
materials in case you need to
repack the option.
2 Make sure you have the following
items:
— 2500-sheet high capacity
feeder or base cabinet
— 2 locking clips
— 2 thumbscrews
— tray labels
High capacity feeder
Locking clips, thumbscrews,
and tray labels
jp_setup.book Page 10 Friday, February 16, 2001 7:42 AM
To Next Page
Loading...
Need help?
General