80
Load print media
Loading trays 4 and 5 Trays 4 and 5 each hold 1000 sheets of
A4, letter, or executive size paper. Do not
load any print media other than paper in
trays 4 and 5.
Note: Tray 4 and 5 are different in
appearance, but load the same way. The
illustrations in this section show loading
of tray 5.
1 Pull the tray toward you.
2 Slide the guide to the rear of the
tray.
The major print media sizes are
marked with a number.
3 Flex the sheets back and forth to
loosen them, and then fan them.
Do not fold or crease the print
media. Straighten the edges of
the stack on a level surface.
jp_setup.book Page 80 Friday, February 16, 2001 7:42 AM
To Next Page
Loading...
Need help?
General