81
Load print media
4 Orient the stack of print media
correctly for the size you are
loading.
Refer to the icons on the front
inside surface of the tray.
Do not load bent or wrinkled print
media.
Note: Do not exceed the maximum
stack height indicated on the guide.
Overfilling the tray may cause paper
jams.
5 Place the print media against the
front left corner of the tray.
Maximum stack height indicator
Orientation icons
jp_setup.book Page 81 Friday, February 16, 2001 7:42 AM
To Next Page
Loading...
Need help?
General