37
Secure the wheels and leveling feet
Step 8: Secure the wheels and
leveling feet
Note: This only applies if you have a
high capacity feeder or a base cabinet
attached to the printer.
Once you have all the printer
components attached and the printer is
positioned where you want it, you need
to stabilize it.
1 Lock the wheels by pushing down
on the lever attached to them.
2 Rotate all the leveling feet until
they touch the ground.
jp_setup.book Page 37 Friday, February 16, 2001 7:42 AM
To Next Page
Loading...
Need help?
General