58
Set up the optional finisher
Warning! The staple head locking plate
is used for shipping purposes only. If it is
not removed, the stapling unit can not
function and an error will occur.
8 Remove the two wingnuts holding
the metal staple head locking
plate.
9 Slide the plate up and remove it.
Discard the plate and wingnuts.
10 Remove the other items from their
packaging.
Remove any plastic wrapping.
Save the carton and packing
materials in case you need to
repack the finisher.
Staple head
locking plate
Wingnuts
jp_setup.book Page 58 Friday, February 16, 2001 7:42 AM
To Next Page
Loading...
Need help?
General