76
Load print media
4 Flex the sheets back and forth to
loosen them, and then fan them.
Do not fold or crease the print
media. Straighten the edges of
the stack on a level surface.
5 Orient the stack of print media
correctly for the size you are
loading.
Refer to the icons on the front
inside surface of the tray.
Do not load bent or wrinkled print
media.
Note: Do not exceed the maximum
stack height indicated on the back guide.
Overfilling the tray may cause paper
jams.
Maximum stack height indicator
Orientation icons
jp_setup.book Page 76 Friday, February 16, 2001 7:42 AM
To Next Page
Loading...
