2-12 Service Manual
7525-xxx
82.xx Waste toner
nearly full
The following actions can be taken:
• Replace the waste toner bottle, and then press Select ( ) to clear the message
and continue printing. See Go to “Waste toner bottle” on page 4-72.
•Press Select ( ) to clear the message and continue printing.
• Order the waste toner bottle so it will be available when the replacement message
is displayed. Once the replacement message is displayed, the printer will not
continue until the waste toner is replaced.
88 <color> Toner Low The term <color> includes black, cyan, magenta, and yellow.
• Replace the specified toner cartridge.
•press
Select ( to clear the message and continue printing.
88 <color> Cartridge
Early Warning
The term <color> includes black, cyan, magenta, and yellow.
• Replace the toner cartridge and press
Select ( to clear the message and
continue printing.
88 Replace <color>
Cartridge
The term <color> includes black, cyan, magenta, and yellow.
• Replace the toner cartridge and press
Select ( to clear the message and
continue printing.
Scanner ADF cover
open
The cover to the ADF is open.
• Close the ADF cover. If this doesn’t remedy the problem, Go to “ADF cover open
service check” on page 2-70”.
Scan job too long The scan job exceeds the maximum number of pages
• Break the scan job into multiple small jobs.
• Cancel the scan job.
Paper cleared Paper is cleared from ADF
• Cancel job
• Restart job - This can only be performed if job recovery is enabled and the job can
be restarted. A new job with the same parameters is started.
User status and attendance messages (continued)
User primary message Explanation
To Next Page
Loading...
