PJL
3-53
Status Message Format
The format of the returned information from the INFO STATUS, USTATUS DEVICE,
and USTATUS TIMED commands is described in this section.
Information Messages
Information messages are returned in this form:
CODE=status code
DISPLAY=display string (in double quotes)
ONLINE=online status
Table 3-12: PJL Information Messages
Printer State Status Code Display String Online Status
Ready 10001
Ready TRUE
Ready 10001
RDYMSG TRUE
Ready with Ink Low 10006
88 Ink Low TRUE
Not Ready 10002
Not Ready FALSE
In the Menus 10002
Not Ready FALSE
Printer reset 10005
Resetting the Printer FALSE
Ready with Toner Low 10006
88 Toner Low TRUE
Ready with Toner Low 10006
88 Yellow Toner Low TRUE
Ready with Toner Low 10006
88 Magenta Toner Low TRUE
Ready with Toner Low 10006
88 Cyan Toner Low TRUE
Ready with Toner Low 10006
88 Black Toner Low TRUE
Ready with Toner Low 10006
88 Color Print Cartridge Low TRUE
Ready with Toner Low 10006
88 Black Print Cartridge Low TRUE
Ready with Toner Low 10006
88 Photo Print Cartridge Low TRUE
Ready with Replace Toner 10006
Replace Toner TRUE
Ready with Replace PC Kit 10006
Replace PC Kit TRUE
Ready with Replace Fuser 10006
Replace Fuser TRUE
x represents an input source code. For more information on input source codes, see “Table 3-16: Tray Values” on page 3-65.
yy represents a size code. For more information on size codes, see “Table 3-17: Media Size Values” on page 3-65.
ww represents the bin code. For more information on bin codes, see “Table 3-18: Output Bin Values” on page 3-66.
Note: The Display String is returned in the current language. A display message longer than one line shows only the first line
of the message.
To Next Page
Loading...
