Lexmark X940E - Operator Intervention - Paper Handling

PJL
3-64
Operator Intervention - Paper Handling
When a Load <tray>, Load Manual, or Change <tray> message appears on the printer
control panel display or through MarkVision Professional, a message is returned to the
host computer indicating the paper source and size for the prompt.
Attendance (operator intervention) messages are returned in this form:
CODE=status code
DISPLAY=display string (in double quotes)
ONLINE=online status
The display string is the first line of the message that displays.
To determine which messages your printer supports, see “Table B-12: PJL Messages
for Paper Handling” on page B-24.
Table 3-15: PJL Messages for Paper Handling
Printer State
Status
Code Display String* Online Status
Intervention required:
wrong paper size in tray x
30034
34 Wrong Paper Size in Tray x FALSE
Intervention required:
wrong paper size manual feed
30034
34 Wrong Paper Size Manual Feed FALSE
Intervention required:
remove paper standard bin
40019
Remove Paper Standard Bin FALSE
Intervention required:
remove paper output bin
40019
Remove Paper Output Bin <bin #> FALSE
Intervention required:
remove paper all output bins
40019
Remove Paper All Output Bins FALSE
Intervention required:
remove paper
40019
Remove Paper <linked set bin name> FALSE
Intervention required:
check <source> paper guide
4100x
Check <source> Paper Guide FALSE
Intervention required:
incorrect media
41xyy
34 Incorrect Media FALSE
Intervention required:
load request
41xyy
Load <source>...
<Custom Type Name>
<Custom String>
<size>
<type> <size>
FALSE
x represents an input source code. For more information, see “Table 3-16: Tray Values” on page 3-65.
yy represents a media size code. For more information, see “Table 3-17: Media Size Values” on page 3-65.
* See your printer See your printer documentation for more information on printer messages.