PJL
3-55
Auto-Continuable Conditions
These status messages are returned independent of the state of the Auto Continue
menu item. Auto-continuable messages are returned in this form:
CODE=status code
DISPLAY=display string (in double quotes)
ONLINE=online status
To determine which messages your printer supports, see “Table B-10: PJL Messages
for Auto-Continuable Conditions” on page B-14.
Table 3-13: PJL Messages for Auto-Continuable Conditions
Printer State
Status
Code Display String Online Status
Intervention required:
PPDS font error
30014
50 PPDS Font Error FALSE
Intervention required:
insufficient collation area
30016
37 Insufficient Collation Area FALSE
Intervention required:
insufficient defragment memory
30016
37 Insufficient Defrag Memory FALSE
Intervention required:
insufficient memory
30016
37 Insufficient Memory FALSE
Intervention required:
memory full
30016
38 Memory Full FALSE
Intervention required:
held jobs may not be restored
30016
Held Jobs May Not Be Restored FALSE
Intervention required:
configuration change
30016
57 Configuration Change FALSE
Intervention required:
complex page
30017
39 Complex Page FALSE
Intervention required:
standard serial error
30018
54 Standard Serial Error FALSE
Intervention required: serial option error 30018
54 Serial Option 1 Error FALSE
Intervention required:
parallel error
30018
54 Parallel Error FALSE
Intervention required:
network software error
30018
54 Std Network Software Error FALSE
Intervention required:
standard serial fax connection lost
30018
54 Std Ser Fax Connection Lost FALSE
1
x equals the number of the parallel, serial, or network port or option installed.
Note: The Display String is returned in the current language. A display string longer than one line shows only the first line of
the message.
To Next Page
Loading...
