PCL
2-6
Envelope
90 DL 220 x 110 8.66 x 4.33 2598 5196 2314 4960 142 118 0 100 100
91 C5 229 x 162 9.02 x 6.38 3826 5408 3542 5172 142 118 0 100 100
99
4
, 100 B5 Envelope 250 x 176 9.84 x 6.93 4156 5904 3872 5668 142 118 0 100 100
600 Other Envelope 216 x 356 8.5 x 14 7016 10096 6712 9856 150 120 0 100 100
89 9 (Com 9) 225 x 98 8.875 x 3.875 2326 5324 2024 5084 150 120 0 100 100
81 10 (Com 10) 241 x 105 9.5 x 4.125 2474 5700 2174 5460 150 120 0 100 100
80 7 3/4 (Monarch) 98 x 191 3.875 x 7.5 2326 4500 2024 4260 150 120 0 100 100
Table 2-2: Lexmark X940e and X945e Paper and Envelope Dimensions (Continued)
Selection Paper/Envelope Dimensions Dimensions by Area (pels)
1
Page Size
Parameters
2
Name mm inches A B C D E F G H I
1
Pel dimensions are for 600 dpi.
2
Page Size Parameters are explained in Table 2-17 on page 2-55.
3
The width of the logical page for A4 paper can be changed from the printer control panel or your software application.
4
Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical
paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark 4039.
Note: The explanation of the printable area assumes the Print Area menu item is set to Normal. For more information, see
“Print Area Menu Item” on page 2-7.
To Next Page
Loading...
