Lexmark X940E - Page 263

PostScript
4-77
EtherTalkType string The “type” of the EtherTalk interface entity name. This parameter also sets the
LocalTalkType parameter to the same value. The new value is returned by the
appletalktype compatibility operator.
Legal value: Any string of 32 or fewer non-null characters. Default value is LaserWriter.
Note: Setting this variable does not affect the value for other physical internal print
servers. The statusdict string appletalktype is correct for the current job port.
EtherTalkZone string The “zone” of the EtherTalk interface entity name.
EtherTalkZone is read/write only to RAM. There is no NVRAM variable for EtherTalkZone.
Legal value: Any string of 32 or fewer non-null characters.
Filtering name Indicates if the input needs further filtering before the data can be correctly processed.
Supported values are:
InterpreterBased
None
HasNames Boolean (Read-only) Always returns False.
Interpreter name (Read-only)
Supported values are:
PostScript
AutoSelect
PCL
PPDS
NodeID integer (Read-only)
On Boolean Designates if the communication channel is On and able to receive and send data.
Supported values are:
True Data is sent and processed.
False Data is lost.
PCLSmartSwitch Boolean Supported values are:
True PCL SmartSwitch is On.
False PCL SmartSwitch is Off.
For more information, see “Using SmartSwitch” on page 2-1.
PortLocation string (Read-only) Designates the physical location of the port related to the parameter set.
Supported values are:
Standard Port
Option Slot 1
Option Slot 2
Option Slot 3
PSSmartSwitch Boolean Supported values are:
True PS SmartSwitch is On.
False PS SmartSwitch is Off.
For more information, see “Using SmartSwitch” on page 4-1.
Type name (Read-only) Always returns the value of /Communications.
Table 4-11: PostScript Emulation Device Parameters (Continued)
Key Type Definition