Lexmark X940E - Page 325

PCL Support
A-1
APPENDIX A: PCL Support
Table A-1 lists PCL emulation commands and identifies printers that support them.
For detailed information about PCL emulation commands and how to select them, see
“PCL Emulation” on page 2-1.
Table A-2 on page A-7 identifies printer support for the GL/2 commands.
Table A-1: PCL Emulation Commands
✓ Supported
✘ Not Supported
Page numbers reference command descriptions; however, certain printers may not
support some commands described in the referenced chapter. Previous Lexmark
printers may have supported the command, so the description is retained in the
chapter. If no page number is listed for a command name in the table, then no Lexmark
printer supports the command.
Printer Model
Command Function Page
C935dn,
C935dtn,
C935dttn,
C935hdn
X940e,
X945e
ESC
E Printer Reset 2-53 ✓✓
ESC
Y Display Functions-On 2-74 ✓✓
ESC
Z Display Functions-Off 2-75 ✓✓
ESC
z Print Test Page 2-75 ✘✘
ESC
&a#C Horizontal Cursor Position (in Columns) 2-59 ✓✓
ESC
&a#G Duplex Page Side Selection 2-58 ✓✓
ESC
&a#H Horizontal Cursor Position (in Decipoints) 2-59 ✓✓
ESC
&a#L Set Left Margin 2-56 ✓✓
ESC
&a#M Set Right Margin 2-56 ✓✓
ESC
&a#N Negative Motion ✘✘
ESC
&a#P Print Direction 2-56 ✓✓
ESC
&a#R Vertical Cursor Position (in Rows) 2-60 ✓✓
ESC
&a#V Vertical Cursor Position (in Decipoints) 2-60 ✓✓
ESC
&b#M Monochrome Print Mode 2-71 ✓✓
ESC
&b#W[data] Configuration Command ✘✘