Lexmark X940E - Page 402

Index
X-14
printer languages, selecting (continued)
switching 5-1
printer specifications
airflow requirement 7-1
altitude 7-5
atmospheric pressure 7-5
clearance requirements 7-4
dimensions 7-3
electrical 7-2
environmental conditions 7-5
flash memory and disk retrieval speeds 6-13
interfaces 8-1
noise emission levels 7-1
power requirements 7-2
size 7-3
weight 7-3
protocol
DTR/DSR 8-16
fastbytes data transfer sequence 8-8
Robust XON 8-15
RS-232C 8-17
standard data transfer sequence 8-7
XON/XOFF 8-18
R
raster compression mode 2-79
adaptive compression 2-83
delta row 2-82
group 3 and 4 2-84
Lexmark adaptive 2-85
run-length encoded data 2-81
Tagged Image File Format (TIFF) 2-81
uncoded data 2-80
raster image graphics 2-79
required clearance 7-4
Resource Data Collection 6-2, 6-3
Robust XON protocol 8-15
RS-232C
cable pin assignments 8-11
port compatibility 8-20
protocol timing 8-17
XON/XOFF protocol timing 8-18
S
selecting printer languages
setting for different interfaces 5-2
SmartSwitch 5-1
serial interface
network support 8-20
RS-232C
cable pin assignments 8-11
communication parameters 8-13
DTR and DTR/DSR protocol timing 8-17
port compatibility 8-20
protocol 8-16
serial configuration recommendations 8-19
using RS-232C 8-11
when to use 8-11
service errors 3-71
size, printer 7-3
SmartSwitch 5-1
setting for different interfaces 5-2
switching printer languages 5-1
sniffing 5-3
specialty PCL emulation fonts
forward/backward compatibility modes 2-14
specialty PCL fonts 2-14
specifications
See printer specifications
standard PCL emulation fonts 2-10
forward/backward compatibility modes 2-10
standard protocol 8-7
status messages
attendance conditions 3-59
auto-continuable conditions 3-55
information messages 3-53
operator intervention - paper handling 3-64
operator intervention - paper jams 3-67
PostScript emulation 4-93
switching printer languages
MarkVision Professional 2-1
methods 5-1
PCL emulation 2-1
PostScript emulation 4-1
printer control panel 2-1, 4-1
Printer Job Language (PJL) 3-3
setting for different interfaces 5-2
SmartSwitch 5-1
software program 2-2, 4-2
Symbol Set Tables, locating ID values 2-51