In Windows Vista:
a Click .
b Locate the Start Search box.
c Type D:\setup.exe, where D is the letter of your CD or DVD drive.
In Windows XP:
a Click Start ª Run.
b Type D:\setup.exe, where D is the letter of your CD or DVD drive.
In Macintosh:
a Click the CD icon on the desktop.
b Double-click Install.
3 Follow the instructions on the Welcome screen to set up the printer.
Connecting the printer directly to the computer with a USB cable
The procedure differs depending on your operating system. The steps for Windows and Macintosh are below.
1 Insert the installation software CD for Windows or Macintosh, depending on the operating system you use on
your computer.
2 Wait a minute for the Welcome screen to appear.
If the Welcome screen does not appear after a minute, do one of the following:
In Windows Vista:
a Click .
b Locate the Start Search box.
c Type D:\setup.exe, where D is the letter of your CD or DVD drive.
In Windows XP:
a Click Start ª Run.
b Type D:\setup.exe, where D is the letter of your CD or DVD drive.
In Macintosh
a Click the CD icon on the desktop.
b Double-click Install.
3 Follow the instructions on the Welcome screen to set up the printer.
Connecting the printer to a network
37
To Next Page
Loading...
