Lexmark XM3250 - Sending an E-mail; Creating an E-mail Shortcut

Sending an e-mail
Before you begin, make sure that the SMTP settings are
configured.
For more information, see
“Configuring
the e‑mail SMTP settings” on page 46.
Using the control panel
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch E-mail, and then enter the needed information.
3 If necessary, configure the output file type settings.
4 Send the e-mail.
Using a shortcut number
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Shortcuts > E‑mail.
3 Select the shortcut number.
4 Send the e‑mail.
Creating an e-mail shortcut
1 From the home screen, touch E‑mail.
2
Configure
the settings, and then touch
.
3 Create a shortcut.
E-mailing 54