Holding faxes
Note: Make sure that fax is
configured.
For more information, see “Setting up the printer to fax” on page 55.
1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes.
2 Select a mode.
Forwarding a fax
Note: Make sure that fax is configured. For more information, see “Setting up the printer to fax” on page 55.
1 Create a destination shortcut.
a From the home screen, touch Shortcut Center.
Note: The icon and name may have been changed. For more information, contact your administrator.
b Select a printer function, and then touch Create Shortcut.
c Configure the settings, and then touch Save.
d Type a unique shortcut name.
e Tou ch OK.
Note: Take note of the shortcut number.
2 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
3 Touc h Fax Forwarding and then touch Forward or Print and Forward.
4 Touc h Forward to, and then select a destination.
5 Select a destination type, and then enter the shortcut number of the destination.
Faxing 66
To Next Page
Loading...
