316
5-6. Using an external device
IS350/300/200t_U (OM53D18U)
■ USB memory functions
● Depending on the USB memory device that is connected to the system, the device
itself may not be operable and certain functions may not be available. If the device is
inoperable or a function is unavailable due to a malfunction (as opposed to a system
specification), disconnecting the device and reconnecting it may resolve the problem.
● If the USB memory device still does not begin operation after being disconnected and
reconnected, format the device.
■ Error messages for USB memory
■ USB memory
● Compatible devices
USB memory devices that can be used for MP3, WMA and AAC playback.
● Compatible device formats
The following device format can be used:
• USB communication format: USB2.0 FS (480 Mbps)
• File system format: FAT16/32 (Windows)
• Correspondence class: Mass storage class
MP3, WMA and AAC files written to a device with any format other than those
listed above may not play correctly, and their file names and folder names may not
be displayed correctly.
Items related to standards and limitations are as follows:
• Maximum directory hierarchy: 8 levels
• Maximum number of folders in a device: 3000 (including the root)
• Maximum number of files in a device: 9999
• Maximum number of files per folder: 255
Message Cause/Correction procedures
“Connection error.”
This indicates a problem with the USB memory
device or its connection.
“There are no files available for
playback.”
This indicates that no MP3/WMA/AAC files are
included on the USB memory device.
To Next Page
Loading...
Need help?
General
