348
5-11. Bluetooth
®
IS350/300/200t_U (OM53D18U)
When registering/connecting a cellular phone
When making/receiving a call
A cellular phone cannot be registered.
An incorrect passcode was entered on the cellular phone.
Enter the correct passcode on the cellular phone.
The registration operation has not been completed on the cellular phone side.
Complete the registration operation on the cellular phone (approve registration
on the phone).
Old registration information remains on either this system or the cellular phone.
Delete the existing registration information from both this system and the cellu-
lar phone, then register the cellular phone you wish to connect to this system.
(P. 322)
A Bluetooth
®
connection cannot be made.
Another Bluetooth
®
device is already connected.
Manually connect the cellular phone you wish to use to this system. (P. 325)
Bluetooth
®
function is not enabled on the cellular phone.
Enable the Bluetooth
®
function on the cellular phone.
“Check your telephone.” message is displayed.
Bluetooth
®
function is not enabled on the cellular phone.
Enable the Bluetooth
®
function on the cellular phone.
Old registration information remains on either this system or the cellular phone.
Delete the existing registration information from both this system and the cellu-
lar phone, then register the cellular phone you wish to connect to this system.
(P. 322)
A call cannot be made/received.
Your vehicle is in a “No Service” area.
Move to where “No Service” no longer appears on the display.
To Next Page
Loading...
Need help?
General
