392
6-4. Using the other interior features
IS350/300/200t_U (OM53D18U)
The garage door opener (HomeLink
®
Universal Transceiver) is manufactured
under license from HomeLink
®
.
The HomeLink
®
compatible transceiver in your vehicle has 3 buttons which can
be programmed to operate 3 different devices. Refer to the programming
method below appropriate for the device.
Indicator light
Buttons
■ Before programming HomeLink
®
● During programming, it is possible that garage doors, gates, or other devices
may operate. For this reason, make sure that people and objects are clear of
the garage door or other devices to prevent injury or other potential harm.
● It is recommended that a new battery be placed in the remote control trans-
mitter for more accurate programming.
● Garage door openers manufactured after 1995 may be equipped with rolling
code protection. If this is the case, you will need a stepladder or other sturdy,
safe device to reach the “Learn” or “Smart” button on the garage door opener
motor.
Garage door opener
The garage door opener can be programmed to operate garage doors, gates,
entry doors, door locks, home lighting systems, security systems, and other
devices.
Programming the HomeLink
®
1
2
To Next Page
Loading...
Need help?
General
