Lexus NX200t - Limitations of the Automatic High Beam; Notes When Using the Automatic High Beam System

217
4-3. Operating the lights and wipers
4
Driving
NX200t_U_OM78006U
WA R NI N G
■ Limitations of the Automatic High Beam
Do not rely on the Automatic High Beam. Always drive safely, taking care to observe
your surroundings and turning high beam on or off manually if necessary.
NOTICE
■ Notes when using the Automatic High Beam system
Observe the following to ensure that the Automatic High Beam functions correctly.
● Do not place items on the dashboard. There is a possibility that the camera sensor will
mistake items reflected in the windshield for streetlights, the headlights of other vehi-
cles, etc.
● Do not install a parking tag or any other accessories near or around the camera sen-
sor.
● Do not overload the vehicle.
● Do not modify the vehicle.
● Do not replace windshield with non-genuine windshield.
Contact your Lexus dealer.
● Do not touch the camera sensor.
● Do not subject the camera sensor to a strong
impact.
● Do not disassemble the camera sensor.
● Do not spill liquids onto the camera sensor.
● Do not apply window tinting or stickers to the
camera sensor or the area of windshield near
the camera sensor.