EasyManua.ls Logo

Lexus NX200t - Accelerating after Setting the Vehicle Speed; Automatic Cancelation of Constant Speed Control Mode; Automatic Cancelation of Vehicle-To-Vehicle Distance Control Mode; Dynamic Radar Cruise Control Can be Set When

Lexus NX200t
660 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
238
4-5. Using the driving support systems
NX200t_U_OM78006U
Dynamic radar cruise control can be set when
The shift lever is in D.
Vehicle speed is above approximately 30 mph (50 km/h).
Accelerating after setting the vehicle speed
The vehicle can accelerate by operating the accelerator pedal. After accelerating, the
set speed resumes. However, during vehicle-to-vehicle distance control mode, the vehi-
cle speed may decrease below the set speed in order to maintain the distance to the pre-
ceding vehicle.
Automatic cancelation of vehicle-to-vehicle distance control mode
Vehicle-to-vehicle distance control mode is automatically canceled in the following situ-
ations. “Radar Cruise Control Unavailable” will be displayed on the multi-information
display:
Actual vehicle speed falls below approximately 25 mph (40 km/h) when there are no
vehicles ahead.
The preceding vehicle leaves the lane when your vehicle is following at a vehicle speed
below 25 mph (40 km/h). Otherwise, the sensor can not properly detect the vehicle.
VSC is activated.
TRAC is activated for a period of time.
When the VSC or TRAC system is turned off by pressing the VSC OFF switch.
The sensor cannot detect correctly because it is covered in some way.
The windshield wipers are operating at high speed (when the wiper switch is set to the
AUTO” mode or the high speed wiper operation position).
Pre-collision braking is activated.
If vehicle-to-vehicle distance control mode is automatically canceled for any other rea-
son, there may be a malfunction in the system. Contact your Lexus dealer.
Automatic cancelation of constant speed control mode
Constant speed control mode is automatically canceled in the following situations:
Actual vehicle speed is more than approximately 10 mph (16 km/h) below the set vehi-
cle speed.
Actual vehicle speed falls below approximately 25 mph (40 km/h).
VSC is activated.
TRAC is activated for a period of time.
When the VSC or TRAC system is turned off by pressing the VSC OFF switch.
Pre-collision braking is activated.

Table of Contents

Related product manuals