Lexus NX200t - Installing Towing Eyelets

545
8-2. Steps to take in an emergency
8
When trouble arises
NX200t_U_OM78006U
Take out the towing eyelet. (P. 561)
Remove the eyelet cover using a flat-
head screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehi-
cle body as shown in the illustration.
Insert the towing eyelet into the hole
and tighten partially by hand.
Tighten down the towing eyelet
securely using a wheel nut wrench.
Securely attach a cable or chain to the towing eyelet.
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the engine.
If the engine does not start, turn the engine switch to IGNITION ON mode.
Shift the shift lever to N and release the parking brake.
When the shift lever cannot be shifted: P. 576
Installing towing eyelets
1
2
3
4
5
6
7