EasyManua.ls Logo

Lexus NX200t - Cleaning the Exterior Lights; To Prevent Paint Deterioration and Corrosion on the Body and Components (Aluminum Wheels Etc.); When Using a High Pressure Car Wash; When Using an Automatic Car Wash (Vehicles with Rain-Sensing Windshield Wipers)

Lexus NX200t
660 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
475
7-1. Maintenance and care
7
Maintenance and care
NX200t_U_OM78006U
NOTICE
To prevent paint deterioration and corrosion on the body and components (aluminum
wheels etc.)
Wash the vehicle immediately in the following cases:
After driving near the sea coast
After driving on salted roads
If coal tar or tree sap is present on the paint surface
If dead insects, insect droppings or bird droppings are present on the paint surface
After driving in an area contaminated with soot, oily smoke, mine dust, iron pow-
der or chemical substances
If the vehicle becomes heavily soiled with dust or mud
If liquids such as benzene and gasoline are spilled on the paint surface
If the paint is chipped or scratched, have it repaired immediately.
To prevent the wheels from corroding, remove any dirt and store in a place with low
humidity when storing the wheels.
Cleaning the exterior lights
Wash carefully. Do not use organic substances or scrub with a hard brush.
This may damage the surfaces of the lights.
Do not apply wax to the surfaces of the lights.
Wax may cause damage to the lenses.
To prevent damage to the windshield wiper arms
When lifting the wiper arms away from the windshield, pull the driver side wiper arm
upward first, and repeat for the passenger side. When returning the wipers to their
original position, do so from the passenger side first.
When using an automatic car wash (vehicles with rain-sensing windshield wipers)
Set the wiper switch to the off position.
If the wiper switch is in “AUTO”, the wipers may operate and the wiper blades may be
damaged.
When using a high pressure car wash
When washing the vehicle, do not let water of the high pressure washer hit directly or
the vicinity of the camera. Due to the shock from the high pressure water, it is possible
the device may not operate as normal.
Do not bring the nozzle tip close to following parts and boots (Rubber or resin manu-
factured cover), or connectors. Parts may be damages if they come into contact with
high pressure water.
Drive train system related parts
Steering parts
Suspension parts
•Brake parts

Table of Contents

Related product manuals