Lexus NX200t - Connecting Method Is Set to “Vehicle”; Connecting Method Is Set to “Device”; Connecting a Bluetooth Audio Player

376
5-7. Connecting Bluetooth
®
NX200t_U_OM78006U
Connecting a Bluetooth
®
audio player
When the portable audio player is in standby for a connection, it will be automat-
ically connected whenever the engine switch is in either ACCESSORY or IGNI-
TION ON mode.
Operate the portable player and connect it to the Bluetooth
®
audio system.
Go to “Bluetooth
* Setup”: “MENU” button  “Setup”  “Bluetooth*”
Select the device to connect.
Select “Connect All” or “Connect as an Audio player”.
If the desired Bluetooth
®
device is not displayed, register the device.
(P. 374)
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
There are 2 portable audio player connection settings available: connecting
from the vehicle and connecting from the portable player.
Connecting method is set to “Vehicle”
Connecting method is set to “Device”
1
2
3