■ To prevent damage to or incorrect operation of the LDA
Observe the following to ensure that the LDA system functions correctly
● Do not modify the headlights or attach stickers to the surface of the lights.
● Do not modify the suspension or replace it with non-genuine parts.
● Do not install or place anything on the hood or the grille. Also, do not install a grille
guard (bull bars, kangaroo bar, etc.).
● If your windshield needs repairs, contact your Lexus dealer.
● Do not overload with luggage
■ Lane recognition camera
Observe the following to ensure that the LDA system functions correctly
● Keep the windshield clean at all times.
Performance could be affected if the windshield is dirty, or if raindrops, condensation
or ice are adhering to the windshield.
● Do not spill liquids onto the lane recognition camera.
● Do not attach window tinting to the windshield.
● Do not install an antenna in front of the lane recognition camera.
● If the windshield area in front of the lane recognition camera is fogged up, use the
windshield defogger to remove the fog from that area. (P. 425)
When it is cold, using the heater with air blowing to the feet may allow the upper part
of the windshield to fog up. This will have a negative effect on the images.
● Do not scratch the camera lens, or let it get dirty.
When cleaning the inside of the windshield, be careful not to get any glass cleaner,
etc., on the lens. Also, do not touch the lens.
For lens repair, contact your Lexus dealer.
● Do not change the installation position or direction of the lane recognition camera or
remove it.
The direction of the lane recognition camera is precisely adjusted.
● Do not subject the lane recognition camera to strong impact or force, and do not dis-
assemble the lane recognition camera.
● Do not replace windshield with non-genuine windshield.
Contact your Lexus dealer.
To Next Page
Loading...
