Lexus NX200t - Adding Engine Oil; Engine Oil Consumption

493
7-3. Do-it-yourself maintenance
7
Maintenance and care
NX200t_U_OM78006U
■ Adding engine oil
If the oil level is below or near the
low level mark, add engine oil of the
same type as that already in the
engine.
Make sure to check the oil type and prepare the items needed before adding
oil.
Remove the oil filler cap by turning it counterclockwise.
Add engine oil slowly, checking the dipstick.
Install the oil filler cap by turning it clockwise.
■ Engine oil consumption
A certain amount of engine oil will be consumed while driving. In the following situations,
oil consumption may increase, and engine oil may need to be refilled in between oil
maintenance intervals.
● When the engine is new, for example directly after purchasing the vehicle or after
replacing the engine
● If low quality oil or oil of an inappropriate viscosity is used
● When driving at high engine speeds or with a heavy load, when towing, or when driving
while accelerating or decelerating frequently
● When leaving the engine idling for a long time, or when driving frequently through
heavy traffic
Engine oil selection P. 593
Oil quantity (Low  Full) 1.6 qt. (1.5 L, 1.3 Imp.qt.)
Items Clean funnel
1
2
3