354
6-2. Using the safe driving support functions
*
: Automatic buzzer mute function is enabled. (P.354)
■ Buzzer operation and distance to
an object
A buzzer sounds when the sensors are
operating.
The buzzer beeps faster as the vehi-
cle approaches an object.
When the vehicle comes within
approximately 1.0 ft (30 cm) of the
object, the buzzer sounds continu-
ously.
When 2 or more sensors simultane-
ously detect a static object, the
buzzer sounds for the nearest
object.
Even when the sensors are operat-
ing, the buzzer will be muted in
some situations. (automatic buzzer
mute function)
■ Adjusting the buzzer volume
The buzzer volume of the intuitive
parking assist, RCTA and RCD can be
adjusted all together on of the cen-
ter display. (P.592)
■ Muting a buzzer
A mute button will be displayed on the
center display when an object is
detected. To mute the buzzer, select a
mute button.
The buzzers for the intuitive parking
assist, RCTA and RCD (if equipped)
function will be muted simultaneously.
Mute will be canceled automatically in
the following situations:
When the shift position is shifted.
When the vehicle speed exceeds a
certain speed.
When there is malfunction in a sen-
sor or the system is temporarily
unavailable.
When the operating function is dis-
abled manually.
When the power switch is turned
off.
The object warning function informs the driver of the existence of objects along the
side of the vehicle, using a display and buzzer, if the objects are within the esti-
mated path of the vehicle.
2.0 ft. (60 cm) to 1.5 ft. (45 cm)
*
Side sensor: 2.0 ft. (60 cm) to 1.3 ft. (40 cm)
*
Medium
1.5 ft. (45 cm) to 1.0 ft. (30 cm)
*
Side sensor: 1.3 ft. (40 cm) to 1.0 ft. (30 cm)
*
Fast
Less than 1.0 ft. (30 cm), Less than 0.5 ft. (15 cm)
*
Continuous
Approximate distance to obstacle Buzzer
Object warning function (vehicles with Advanced Park)